Shurflo Aqua King Ii Troubleshooting
For troubleshooting the Shurflo Aqua King II water pump, check for debris, tap the bottom of the pump, remove and clean the pump mounts, and inspect the check valve and strainer. Adjust the pressure switch if necessary.
Common Issues With Shurflo Aqua King Ii
There are a few common issues that you may encounter with the Shurflo Aqua King II pump. One of the problems you might face is a lack of water flow. If you’re experiencing this issue, try tapping the bottom of the pump to remove any debris that may be blocking the flow.
Another problem you might encounter is a pump that isn’t pumping water. In this case, you’ll want to check the strainer and adjust the pressure switch if necessary. Finally, an overflowing water tank can also be an issue. To troubleshoot this problem, check the check valve within the pump head and flush the water from your fresh tank through the valve.
By following these troubleshooting steps, you can quickly resolve common issues with the Shurflo Aqua King II pump.
No Water Flow
If you are experiencing a lack of water flow from your Shurflo Aqua King II pump, there are a few troubleshooting steps you can take. First, check to make sure that the pump switch is turned on. If it is, try tapping the bottom of the pump gently to dislodge any potential blockages.
Next, remove any mounts or obstructions that may be blocking the pump. Take off the top of the pump and inspect for any debris that may be blocking the flow. Once you have cleared any blockages, reassemble the pump and test it to see if the water flow has been restored.
By following these steps, you should be able to resolve the issue and get your Shurflo Aqua King II pump working properly again.
Pump Not Pumping
When troubleshooting a Shurflo Aqua King II pump that is not pumping, there are several steps you can follow. First, make sure to turn on the pump switch. Then, check the strainer for any blockages that may be preventing the flow of water.
If necessary, adjust the pressure switch to ensure it is set correctly. Next, examine the check valve within the pump head to ensure it is functioning properly. To flush the water from the fresh tank through the check valve, turn the pump on and let the water flow.
Finally, explore the internal components of the water pump and inspect the check valve to identify any issues. By following these steps, you can troubleshoot and resolve the pump not pumping problem with your Shurflo Aqua King II.
Overflowing Water Tank
If your water tank is overflowing, there are a few troubleshooting steps you can take. First, verify the pressure switch settings to ensure they are correctly configured. If necessary, adjust the pressure switch to the appropriate settings. Additionally, consider the bypass pressure adjustment.
This adjustment can help regulate the pressure at which the bypass starts and the full bypass pressure. By following these steps, you can address the issue of an overflowing water tank and ensure the proper functioning of your Shurflo Aqua King II system.
Additional Resources
If you’re looking for additional resources to troubleshoot issues with your Shurflo Aqua King II marine fresh water pump, there are a few helpful options available. First, you can refer to the Shurflo Aqua King II Marine Fresh Water Pump Manual provided by Pentair.
This manual will provide instructions and guidance on how to adjust the pump and address common problems. Additionally, there’s a helpful video on YouTube titled “Adjusting Shurflo On-Demand Pump” by KleenRite, which provides visual step-by-step instructions on how to adjust the pressure switch.
Finally, The RV Geeks have a blog post titled “Is a Shurflo Water Pump a Good Choice for Your RV? ” That provides valuable insights and considerations when choosing a water pump for your RV. These resources offer valuable information to assist you in troubleshooting and resolving any issues you may encounter with your Shurflo Aqua King II pump.
Credit: www.pentair.com
Frequently Asked Questions Of Shurflo Aqua King Ii Troubleshooting
Why Is My Shurflo Water Pump Not Working?
Possible reasons why your Shurflo water pump is not working could include a clogged filter, low battery or voltage, or a faulty pressure switch.
How Do You Adjust The Pressure Switch On A Shurflo Aqua King 2?
To adjust the pressure switch on a Shurflo Aqua King 2, follow these steps: 1. Turn the switch screw clockwise to increase the shut-off pressure. 2. Turn the switch screw counterclockwise to decrease the shut-off pressure. 3. Adjust the by-pass screw to increase the by-pass starting pressure.
4. Make sure to clean or replace the filter if you’re not getting water flow. Note: It’s important to use caution and refer to the product manual for specific instructions.
How Do You Adjust A Shurflo Pressure Switch?
To adjust a Shurflo pressure switch, turn the switch screw clockwise to increase the shut-off pressure or counterclockwise to decrease it. You can also adjust the bypass pressure by turning the bypass screw.
How Long Does A Shurflo Water Pump Last?
A Shurflo water pump can last a decade or longer, depending on its usage and maintenance.
Conclusion
The Shurflo Aqua King II is a reliable water pump that can enhance the water system in your RV or boat. However, like any mechanical device, it may experience issues from time to time. Understanding how to troubleshoot common problems with the pump can save you time and money.
Some of the common troubleshooting steps include checking for debris in the pump, adjusting the pressure switch, and ensuring proper connections. Additionally, you can refer to the Shurflo Aqua King II troubleshooting manual for detailed instructions on resolving specific issues.
Taking the time to troubleshoot the pump can help ensure a continuous and reliable water supply while on the road or out on the water. With a little knowledge and resourcefulness, you can quickly overcome any problems with your Shurflo Aqua King II water pump and enjoy uninterrupted water flow.
